Archclad™ Cliptray 25 mm can be roll formed in Zinc, Copper, and Aluminium. Similar to traditional mechanic standing seam roofs, Archclad™ Cliptray 25 mm provides a distinctive 25 mm thin structural rib. The aesthetically pleasing design will cover a full range of buildings from residential properties (new or re roof) to commercial constructions.
The very sophisticated economical Archclad™ Cliptray 25 mm opens a new dimension in metal roofing and façades. This system provides a quick and straight forward installation over 19 mm plywood for roofing or 15 mm plywood for façades. Cliptray 25 mm is installed with screws at 300 mm centres—no clips, no seaming—and less labour means cheaper on the pocket.
Pan Width available: 494 mm Pan
Archclad™ Cliptray 25 mm is suitable for façade applications with similar technical procedures as for roof coverings. It is advisable to limit the section lengths to a maximum of 6 m.
Minimum Pitch 3 deg.
Testing to Australian Standards
Standing Seam and Archclad™ Cliptray 25mm profiles have been tested to Australian standards as 4040.3-1992 “Methods of testing sheet roof and wall cladding method 3: Resistance to wind pressures for cyclone regions”.
Architectural Cladding Australia Standing Seam and Cliptray profiles have been tested to Australia Standards AS/NZS 1170.2:2002 Structural Design Actions – Part 2: Wind Actions. Clause 5.3.2. This report details the results of the debris impact testing carried out on a sample of Architectural Cladding Australia’s profile only.